How Do You Set Up a Step and Repeat Backdrop?
A 10×8 step and repeat goes up in about five minutes with two people and no tools: join the top and bottom crossbars, stand the uprights in the base plates, slide the crossbars through the fabric’s pole pockets, lift them onto the uprights and raise the height until the fabric is taut. Everything is in the carry bag.
Step by step
1. Join the two top poles, then the two bottom poles, and extend them to your width. 2. Drop each upright into a base plate and hand-tighten the bolt from underneath. 3. Slide the top and bottom crossbars through the 3″ pole pockets. 4. Lift onto the uprights, lock with the thumb screws, and raise the height until the fabric pulls flat.
Taking it down
Reverse the order. Fold the fabric loosely rather than creasing it, and let it dry fully first if it got damp.
Where to put it
Against a wall or curtain, with about three feet clear in front for people to stand and six to ten feet for the photographer.
At a glance
| Backdrop + adjustable stand + carry bag | $379 |
|---|---|
| Graphic only (you have a stand) | $249 |
| Size | 10 ft × 8 ft (120″ × 96″) |
| Material | 9 oz wrinkle-free fabric, low sheen, single sided |
| Shipping | Free FedEx Ground, about 3 business days door to door |
When another printer will cost you less
- It goes outside in wind. A 10×8 fabric panel is a sail; in a breeze it needs anchoring or a wall behind it. For a windy outdoor spot, a vinyl banner tied to a fence is safer.
- You need double-sided or bigger than 10×8. Ours is single sided, up to 10×8. Trade-show suppliers carry 20 ft tension-fabric walls.
Order a step and repeat
Send a logo and get a proof of the repeat pattern within 2–4 hours. $379 with the stand, shipped free.
Order a backdrop — $379 →