Custom Event Tent
Full-color canopy printed seam to seam on a heavy-duty aluminum hex frame. Pops up in minutes, folds into the carry bag when the day's done.
What you need
Own a frame already?Full walls
$279 each · floor to roofHalf walls
$209 each · counter heightStrip color
free — match your canopyCarry bag
Weight bags
required on pavementYour configuration
360 degrees of branding
Your artwork prints across all four peaks and all four valance panels, seam to seam. That's the difference from a plain white rental with a vinyl sticker on it — people read your name from across the lot, not from three feet away.
The frame is 40mm aluminum hex tube with 1mm walls. Steel-framed tents bend and buckle after a season of setups; aluminum hex doesn't, and it's light enough for one person to carry.
What ships in the box
- Full-color printed canopy top
- Aluminum hex frame with telescopic legs
- 4 ropes and 4 ground stakes
- Carry bag (rolling upgrade available)
Add it later
Walls attach with sewn-in velcro loops, so you can start with an open canopy and add a back wall or half walls before your next event without replacing anything.
Where they end up
Farmers Markets
Team Sidelines
Trade Shows
Festivals
Full Wall
Closes off one side completely. Doubles as a wind break and gives you a full-height photo backdrop.
- Sewn-in velcro loops — no hardware
- Works on any of the four sides
- Single-sided print only
- Hangs to ~4″ off the ground
Long-Side Full Wall
The wide back wall on a rectangular tent — nearly 19 feet across on a 10×20. Your single biggest branding surface. Shown here on a 10×10.
- 10×15 and 10×20 only
- Same velcro attachment
- Single-sided print only
- Design as one continuous graphic
Half Wall
Waist height, works as a counter front. Keeps the booth open so you can talk to and serve people across it.
- Support pole + 2 hex clamps included
- Top pole pocket, velcro on the sides
- Single OR double-sided
- Same size on every tent
Accessories
Weight Bags — $69
Set of 4, one per leg. Each holds 50 lbs of sand (sand not included). Required on pavement.
Rolling Bag — $89
A loaded 10×20 package is 80 lbs. Wheels are worth it.
Strip Color — Free
White or black reinforced strips and thread. Pick whichever disappears into your design.
Ropes & Stakes — Included
Four of each, for staking into grass or dirt.
Canopy
| Material | 6 oz tent fabric, 600×600 denier |
| Dye-sublimated, seam to seam | |
| Durability | Scratch resistant, waterproof coated |
| Coverage | All 4 peaks + all 4 valance panels |
| Different art per side | Yes — label files A/B/C/D |
Frame
| Tube | 40mm aluminum hex, 1mm wall |
| Legs | Telescopic, staked foot plates |
| Interior | Crank-out lattice |
Sizes & weight
| 10′ × 10′ | 120″ × 120″ · 124.5–137″ tall · 51 lbs |
| 10′ × 15′ | 175″ × 120″ · 124.5–135″ tall · 60.5 lbs |
| 10′ × 20′ | 235″ × 120″ · 124.5–135″ tall · 80 lbs |
Wall panel sizes
| Full wall | 113″ × 78″ |
| Long side 10×15 | 170″ × 78″ |
| Long side 10×20 | 228″ × 78″ |
| Half wall | 113″ × 39″ |
Turnaround
| Digital proof | 2–4 hours after ordering |
| Production | Ships next business day after approval |
| Shipping | Free FedEx Ground shipping from CA, TX or PA |
| Note | Wall orders add one business day |
Free design templates
Print-ready PDFs at the exact panel sizes, with trim lines and safe zones already marked.
Full Wall
Long-Side — 10×15
Long-Side — 10×20
Half Wall
Complete Pack
File requirements
- PDF or JPEG, single page
- CMYK — no Pantone or spot colors
- 150 dpi at final size
- Fonts converted to outlines
- No crop marks and no bleed
Good to know
- Templates are 1:4 scale — design at that size or full size
- Keep logos and text 3″ inside every edge
- Double-sided half walls need two files
- Canopy uses a shaped template — ask and we'll email it
- No design software? Send a logo, we'll lay it out free
Can I put full walls on all four sides?
Can each side of the canopy have different artwork?
How do I clean the graphics?
Can I leave the canopy on while I collapse the frame?
What fits in the carry bag?
Do I need weight bags?
Single-sided or double-sided walls?
How fast will I get it?
What if my artwork isn't print-ready?
Didn't find it? See the covering every product, or read our — all custom print sales are final, which is why we proof first.
What a printed 10×10 tent actually costs
Custom canopy pricing is confusing on purpose. The number in the advert is almost always the cheapest frame carrying a logo on a solid colour — not a canopy printed edge to edge — and the frame under it is usually a lighter grade than the one you want for a season of setups.
So here is the market, configured like for like. We priced Vispronet’s 10×10 on 9 September 2026 through every combination of frame and print:
| Build | Elsewhere |
|---|---|
| 20mph square-leg frame, logo on a solid colour | $349.99 |
| 25mph hex frame, logo on a solid colour | $549.99 |
| 25mph hex frame, full print | $879.99 |
| 30mph hex frame, full print | $1,120.99 |
| Ours — 40mm aluminium hex, full print seam to seam, stakes and bag | $699 |
At $699 we sit $180 under the cheapest comparable full-print hex build and roughly $420 under the 30mph one. We are not the cheapest tent on the internet and we are not trying to be — the $349.99 option is a real product, it is just a lighter frame with a logo rather than a printed canopy.
See the full side-by-side → · Buying one for a farmers market? · For sports and tournaments?